Spincast Reel Vs Spinning Reel

Spincast Reel Vs Spinning Reel: Things to Know

Spincast reel vs spinning reel. Perhaps a topic that my colleagues are still controversial with each other often, probably only behind the topic Spinning vs Baitcaster. 

So today I’m going to go over a little bit of the pros and cons of both so maybe if you’re trying to decide whether you upgrade to a spinning or you want to stick with a spin casting reel. It kind of shows you the functions of both of them so maybe if you’re stuck in the middle this article will help you make that decision.

See more: Baitcaster Vs Spinning Reel

The Major Differences Between Spincast Vs Spinning Reels 

Design

With a mere glance, the differences between spincast reel vs spinning reel become clear – spincast reels are carefully concealed by a metal nose cone while all components on spinning reels remain readily visible.

While both types are closed-face designs, a spincast reel uses a unique method of casting called “push-button” fishing. This means that the line is released by pushing a button instead of a trigger or crank handle. The design also keeps your fingers away from the line at all times which helps to avoid any accidental tangles.

In contrast, spinning reels have an open-face design with an exposed bail wire that must be manipulated manually when casting and retrieving the line. This requires anglers to use more skill and finesse to accurately cast the line without any tangles.

Needed experience

Another difference between spinning reel vs spincast reel is the level of experience needed to use them. Spincast reels tend to be easier for beginners to use since all they need to do is push a button when casting the line. This makes it well-suited for children who are just getting into fishing as it doesn’t require any specific skill or technique.

Fishing tackle refers to the physical equipment that is used when fishing, whereas fishing techniques refers to the ways the tackle is used when fishing. Spincast reels require less specialized fishing techniques than spinning reels due to their simple design, making them easier for beginners to use.

Spinning reels are more complex and require more skill and practice to master. Experienced anglers who have been using spinning reels for years can make long casts with great accuracy.

In contrast, spinning reels require much more finesse and practice to cast accurately and avoid tangles or snags. As a result, they tend to be better suited for experienced anglers who already have some knowledge of how rods and reels work.

Price range

The third big difference between spinning vs spincast reels is their price range. Generally speaking, spincast reels are less expensive compared to spinning reels since they tend to be simpler in design and easier to produce.

This makes them well-suited for budget-conscious anglers who don’t want to spend too much on a fishing reel but still want something that will perform reliably. Spinning reels, on the other hand, are usually more expensive due to their more complex and specialized design. They can also come with a variety of additional features such as adjustable drag systems and bait clickers which add to the overall cost.

Complexity 

Spinning reels offer a more sophisticated approach to fishing, providing enhanced efficiency and longevity – perfect for frequent fishers. In contrast, spincast models are far less reliable; tending not to survive beyond the span of one season.

When it comes to maintenance and repair, spincast reels tend to be much simpler than spinning reels since all their components are hidden away in one single unit. This makes these reels easier to maintain and repair when needed.

In contrast, because of its open-face design, a spinning reel can be more difficult to service since any repairs or adjustments need to be done on individual components. As a result, these types of reels tend to require more specialized knowledge to properly service them when needed. 

Casting range 

The final major difference between Spincast Reel Vs Spinning Reel is their casting range. Spinning reels offer a much higher casting range, making it easier to cast further distances with less effort. This makes them ideal for anglers who need to cast long distances to reach deeper waters or distant banks.

In contrast, spincast reels tend to have a shorter casting range, making them better suited for situations where precision is needed rather than distance. This makes these types of reels great for use in places such as ponds or small lakes where accuracy is more important than distance.

Overall, both spincast and spinning reels have their strengths and weaknesses depending on the type of fishing you plan on doing. It is important to consider all of the differences between them before making a final decision. Spincast reels are great for beginners and budget-conscious anglers while spinning reels can provide more precision and accuracy for experienced fishermen. Regardless of which one you choose, it is important to practice casting on both types so that you can get a better feel for how they perform in different situations.

Spincast reel

in this simple bit, I thought we take a look at one of the most underestimated reels and bait fishing that’s our little spin casting reel. yes, it really is quite good despite what people think of it as you know only the kid chooses it. Where really anyone can use it.

So spin casting reel obviously gets this name because it shares characteristics of both spinning and a casting reel. Now there are two styles that are available to the angler. A reel with a short neck and a push button at the back of the reel for the thumb. This particular reel is used on a baitcasting rod. The second is a nice long neck with a lift trigger which is lifted by the index finger this reel is designed to be used on a spinning rod.

On this side, one of the things that are most iconic about this reel. Of course, is the thrill cap and this is a very important part. Yes, you can take it off because you need to take it off in order to spool. But it is absolutely useless without the cap on it. The cap helps control the line and both the retrieve and the cast. That’s why the reel will not function without this.

open face reel vs closed

How to Use a Spincaster Reel

Using a spincast reel is fairly simple, and it can help you catch fish with ease. 

To use a spincaster reel, just lock the line in place with one press of the button and release it when your casting reaches its peak. While holding onto your rod tip for aim, let gravity do its work by using just the right weight lure – creating momentum that will send you reeling where you are, please!

The most important part of using the spincast reel is to make sure the bail arm is in the “open” position. This allows the line to be released freely when casting your lure or bait out into the water.

When ready, hold the rod firmly and press down on the release button on the reel. It will release a short burst of line allowing your lure to travel further away from shore. Reel in any excess line before engaging the bail arm by pushing it up with your thumb until it clicks into place. When you feel a bite, disengage the bail arm with your thumb again and let out more line if needed. When you begin to reel in the fish, engage the bail arm again to keep tension on your line.

Advantages of spincast

Well first off the advantage obviously is this ease of use. It allows the angler to learn to cast and learn to fish because being a closed face real there’s no chance of the lying bird nesting or tangling. Because it’s kept behind the cap.

Another advantage of this reel is that if you are not sure whether fishing is your thing and you don’t want to mortgage your house to buy the equipment. This is relatively an inexpensive reel to get your hands on now as I mentioned in the first part of this article.

Make sure you get a well-made reel don’t fall for the cheap plastic ones. Because they don’t work very well. They’re not very sturdy. Also, some of the cheaper reels will not have the pickup pins that pick up the line and wrap it around the spool.

Disadvantages of spincast

One of the disadvantages of spincast is intended for light lines and light lures. It’s not meant for heavy lines, so, therefore, it’s not good for fishing for the big fish.

The reel has a tendency to be a bit on the slow side when it comes to retrieving. This particular reel has a real ratio of four points two to one. Which is about an average speed for retrieval. But it’s certainly a lot slower than a spinning and a casting. So you won’t get the speed for retrieval. The other thing too is because of the enclosed line behind this cap it doesn’t make for a very good distance caster. But it is good for learning how to do accurate precision type casting you would do with a baitcaster.

But distance this is not the reel for it. So light lines light lures very good for using swim baits and spinnerbaits. This is actually what a spincast was designed for.

There are not a lot of lines that go into these reels. This one only has 70 a yard capacity. I think at the most you’ll get an eight-pound test at probably between 110 and 120 yards capacity.

Spinning reel

spinning reel vs spincast

Spinning reels are preferred by anglers all over the world but are still easy enough for beginners to use. Perhaps you were too familiar with Spinning Reels, and I also had a positive article about them, you can refer to here: Baitcaster Vs Spinning Reel

I’ve never had the problem with spinning reels so far luckily. But anyway you can cast farther because you can see there’s comes out as there is for the open face. It works for all types of fishing. And I really like spindles because there is so little resistance with the line coming out is you can cast really small baits. Like you can take a 30-second ounce jig and with like 2 4 pound test lines. You could launch it out there away which is really nice.

How to Use a Spinning Reel

Using a spinning reel is often associated with more skilled anglers due to its slightly more difficult learning curve compared to spincast reels. Before casting out, make sure your drag is set correctly and tighten any loose screws or parts on your rod and reel.

Hold the handle of the rod with one hand and wrap your other hand around it for leverage. With an open bail arm, flick your wrist back as hard as possible while releasing the line from the tip of the rod. This will allow your lure or bait to be thrown further away from shore. Keep in mind that the spinning reel’s spool needs to be parallel to the water for proper casting.

When you feel a bite, move your rod tip up towards the sky and press down on the line release button with your pointing finger. This allows you to feed out the line as needed while maintaining tension on your line should you need it. Engage the bail arm again when you begin reeling in your catch and make sure to “pump” the rod up and down while re-engaging the bail arm at intervals. This will keep steady pressure on your drag system allowing for an easier time landing larger fish.

Advantages of spinning reel

Spinning reels offer many advantages for anglers of all skill levels. With a huge capacity, they are perfect for honing your distance casting skills with ease and low tangles.

Even better – maintenance is no issue. What’s more, this type of reel is perfect for any situation – from conquering light lures or bait on flat water surfaces, all the way up to heavy-duty fish like those you would find offshore. 

You can use them to handle fish of virtually any size while also benefiting from greater control over the speed and drag when fishing with lures or bait. The positioning at the bottom enables better balance as well as improved accuracy when you cast out – creating more success on your trips! Plus, they’re easy to switch between right-handed or left-handed users too!

Disadvantages of spinning reel

While spinning reels can be a great way to enjoy fishing, they come with some potential drawbacks. Being more expensive than other types of reels and not being especially beginner-friendly may put off new anglers. Spinning reels may not be the most ideal choice for anglers looking to hook larger fish species like salmon or halibut. Additionally, heavier lures tend not to fare so well with this reel type due to difficulty in casting further distances compared to others.

Casting requires more effort and dexterity on your end since spinning reels are not always ambidextrously designed. On top of that, you have to be prepared for potential tangles arising thanks to its exposed design which can turn into an absolute nightmare when out fishing!

Summary of Spincast reel vs Spinning reel

Finally, to summarize the theme “Spincast vs Spinning Reel” or “Closed Reel vs Open Reel” I created a table below, hoping they were useful to you

open face vs closed

Conclusion

You already have the answer to the “Spincast reel vs Spinning reel”. Remember, everything depends on your personal preferences. Any reels are expensive or cheap, it will still be useless if you can’t master them.

I hope this article is helpful to you. Do you have another idea?

Further reading:

3.5/5 - (2 votes)